SolidFace Pro 2015 Demo This is a DEMO version from the SolidFace Professional 2D/3D. All features can be used, but this demo does not allow saving.

## About This Game
SolidFace Pro 2015 Demo

This is a DEMO version from the SolidFace Professional 2D/3D. All features can
be used, but this demo does not allow saving.
## Part module
SolidFace Sketch automatically creates parametric reference for modeling
features that can be edited in a very simple and interactive way. This is an
in-house developed module and fully integrated with the 3D module.

SolidFace allows multiple bodies creation. A powerful tool helps in the
development of dependent parts from a single part file.

The parameterization allows not only an easy model editing, but also parts
family creation that is an important issue in automating creation of variant
models with the same constructive basis, such as fasteners, automotive,
hydraulic and civil components. From a parametric part you can automatically
generate dozens of others parts through parameters association, such as
thickness, length, number and diameter of holes, color, material, information,
text, etc.
## Assembly module
Easy, accurate and effective, this module enables you to build assemblies
using modeled parts and sub-assemblies. The automatic link between the modules
facilitates the manipulation of assembly parts, thus any editing on a part or
assembly, results in an automatic change in the assembly that references this
component.

You can build assemblies by inserting components created outside the assembly
document; this is known as bottom-up assembling or if you need to construct a
component that needs dimension references of some assembly components, you can
create it, within the Assembly module. This operation is called in-context or
top-down part creation.

To facilitate the assembly process, the part elements can be enabled or
disabled at any time without interfering the process of inserting (bottom-up)
or creating (top-down) new components.
## Drawing module
Besides the 2D draft capabilities explained in the SolidFace drawing product,
you can also insert parts and assemblies into the drawing module in order to
generate automatic orthographic, sections and details views. These views and
dimensional annotations are created according to DIN and ANSI norms.
Personalized by the designer. The 3D models views can be displayed in several
model styles. The sections or details views are automatically created and
aligned with the base view.

Another advantage of the automatic link between the modules is the ability to
copy and paste 2D geometric entities to the 3D Sketch module in order to use
it as reference geometry to 3D features operations like extrude, revolve, etc.
## Exploded view
An exploded view is a diagram, picture or technical drawing of an object, that
shows the relationship or order of assembly of various parts. This allows the
components (parts and sub-assemblies) to be visualized with defined
displacements. The exploded view can be enabled or disabled at any time of the
project creation.
## 3D Direct modeling
Interact directly with the geometry of the model. Manipulate it by pushing,
pulling, or twisting.

Keeping the steps that create the final model, direct modelling allows the
features geometry to be parametric modified by editing the feature used to
create the new faces.
## 2D/3D Movement simulation
One of the many capabilities of logical conditions is to enable the system to
detect the collision of components assembly. The collision or the simulation
process can be aborted and analyzed at any time. This makes possible not just
a simple mechanism video demonstration but also a real-time movement
simulation.

The parameterization capability is one of the greatest advantages of SolidFace
and it is present in all design steps. 3D Motion simulation is no different;
the simulation is updated simultaneously with the movement. Another important
capability is the simulation of 2D mechanisms, which can be performed either
in 2D drawing or in 3D sketch module.
## Product specification
* Part module;
* Sketch module;
* Assembly module;
* Drawing module;
* Exploded view;
* Communication with other applications through the Windows ® clipboard (Clipboard);
* Communication with other CAD software via standard X_T®, X_B®, DWG®, DXF®, BMP, etc;
* 3D history construction tree and direct command editing;
* Associative dimensioning and fully adapted to a number of standards;
* Geometric operations and editing through direct entity or feature tree selection;
* Parametric and associative geometric construction references such as midpoint, center of arcs and circles, endpoint, etc;
* Creation of complex geometries such as cams, gears etc;
* 3D features construction such as Extrude, Revolve, Loft, Sweep, etc;
* 3D family of parts creation using CSV (Excel files association) or TXT table files;
* Configurable toolbars;
* Possibility of managing multiple projects simultaneously (multiple instances);
* The graphics screen can be divided up to 16 view windows, allowing the visualization of several project details;
* Print Preview;
* 3D and PDF® printing compatibility;
* Local and global variables;
* Definition of parametric variables via commands, questions, or variable tables;
* Logical conditions If-then-else;
* Parametric generation of bill of materials with associative link with Excel ® and Access ®;

SolidFace Pro 2015